RC200CEZ - EZ Boss-Lock Cam & Groove Part C Coupler x Hose Shank

Applications
Designed for use with liquids.

Available Options
Other gasket types are available.

Construction
Nitrile Rubber gasket
Boss-Lock cam arms
Supplied with pull-ring safety clips
How It Works
To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
The cast-in lugs allow safety clips to be attached once the lugs are passed through slots in the special cam lever arms providing a positive locking action.
The pull ring safety clip simplifies the locking action on Boss-Lock couplers. No more inserting clips or dangling lanyards, just a twist and it’s locked, giving you a low profile positive locking action.
Safety Notes
Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
Specifications
Produced to interchange with all product produced to Commercial Item Description A-A-59326D

Use
For use with Strap-grip saddles and fittings

WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.