HUM206400CS - Dixon Male Frac Fitting with Nut

Applications
Used in the fast paced transfer of water and sand slurry at hydraulic fracturing sites.

Compatibility & Interchange Data
Interchangeable with current fittings; phase them into your current operation

Construction
Frac fittings: machined iron to ASTM standards; zinc plated
Nut: forged steel meeting AISI standards
Nitrile Rubber O-ring (O347BU)
Figures 100 and 200 have a metal-to-metal sealing surface; Figure 206 is similar to Figure 200 with a secondary seal to supplement the metal-to-metal design.
Description
Male fitting

Features
One-piece design eliminates leak path experienced with two-piece threaded systems
Long lasting and dependable forged hammer nut
Durable and safe with reliable hose retention when crimped as specified
Includes
Nut
O-ring
Note
Water and petroleum transfer hoses rated from 100 to 300 PSI WP (4:1 SF) have excellent test results with the standard King Crimp ferrules CF400-xxCS)

Safety Notes
400 PSI working pressure with a minimum 4:1 safety factor (hose burst: hose working pressure) is only achieved with: 4” size requires heavy duty (HD) crimp ferrules, CF400-6CSHD through CF400-16CSHD and heavy duty stems

Specifications
Machined malleable iron stems to ASTM A47 standard

Use
Designed to work with Dixon King Crimp Sleeves or Ferrules.